TG22UG Print E-mail
TG22SUniversal grab for sorting and handling recycling materials, as well as forestry applications. The TG22UG-9 grapple has four claws on one side and five on the other side.  It is a bypass design, so the material is always held tighly and securely. This grapple is suited for use on mini excavators and small knucklebooms.  It can be mounted with either a hanging rotator or a rigid rotator.

The main features are:
  • The TG22UG-9 is manufactured using Hardox 400 HB steel. Hardox is a very hard and durable steel used by quality manufacturers for grapples that require exceptional strength.
  • Large, powerful cylinders with heavy pistons.
  • A belly plate to protect the cylinder from underneath.
  • The individual claws are shaped like fingers, enabling the grapple to penetrate into piles of brush. However, sorting grapples are also adept at grabbing logs, scrap, or other materials.
  • An excellent geometry. The form of the claws enables a smooth roll-in and roll-out of the load, enabling a controlled grab or release. See the Motion Drawing below.
TG22UG/9 Motion Drawing


Technical Specs:
Max Opening (A)

42.7"
Height Open (B)

33.7"
Height Closed (C)
22.9"
Min Opening (D)

3.1"
Width of Jaw (E)
22.4"
Max Lifting Capacity
6,614 lbs
Grip Force
3,822 lb ft
Working Pressure
3,626 psi
Jaw Material
Hardox
Number of Claws
9
Weight
657 lbs
Excavator Max Operating Weight (Hanging - Rigid) 22,046 lbs - 15,432 lbs
Recommended Rotator (Hanging - Rigid) R12 - RMR8*
Recommended Oil Flow 16 gpm
View Other Models
Sorting Grapples Main Page
TG12UG-7 / TG22UG-9 / TG28UG-11 / TG36UG-13 / GX28-50 / GX36-50 / GX55-50

*Available by Special Order only.

 
Click to Request Info or Call 888-589-6160

A Northeast Implement Company
Northeast Implement BBB Business Review

  • Click for Owner Manauls
  • FarmiWinch Features

Visit Our Other Great Brands

Farmi Winch La Magdalena PTO Shafts Naarva Grip Felling Heads Intermercato Rotators Farmi  Woodchippers